Premium 16in1 Multifunction Combine
Cosmetic combos are essential equipment for any beauty salon or aesthetic medicine practice. There are many models of cosmetic combos available on the market that combine several devices, starting from those 2in1, even up to 10in1. The Medika Premium Multifunctional Cosmetic Combine can have as many as 10 modules, which you can customize according to your needs. The device uses high quality components, as well as innovative proprietary solutions that distinguish our products from others available on the market. Unique, minimalist design is our hallmark.
- Medika Premium device
- Additional modules
- Power cable
- User Manual
Descriptions and specifications of
accessories.
Devices and heads made in Poland - the best quality, modern design, after-warranty care and professional training.
Ultrasound works in three ways:
- Mechanically - they lead to an increase in the permeability of cell membranes, accelerate cell metabolism and improve microcirculation. As a result, tissues are supplied with nutrients and oxygen, which is essential for them.
- Thermally (heat) - blood vessels dilate, the supply of blood and oxygen and nutrients to cells increases. Fibroblasts are stimulated to produce collagen and elastin.
- Physicochemical - accelerate the metabolism in the skin, thus improving the pH on the skin surface, as well as the absorption of nutrients.
2 pieces
30 W (1.8W/cm2).
1 MHz
Continuous operation, 5Hz pulse, 10Hz pulse
Needle-free mesotherapy involves the introduction of active substances deep into the skin. It is a completely non-invasive method. The device takes advantage of physical phenomena that occur in cell membranes and in the stratum corneum of the skin, which makes it possible to provide new ways of introducing active preparations without the use of needles. During mesotherapy, electroporation occurs. This is a phenomenon that enhances the action of ultrasound waves. It consists of 4 stages and each has strictly defined working parameters. They are designed to enhance the transport of active ingredients deep into the skin and improve blood and lymph flow.
2
30 W (1.8W/cm2).
1 MHz
up to 6.2 mA
Thanks to the facial analyzer, we are able to examine one of the most important diagnostic parameters, namely the level of skin hydration. The analyzer was created in order to correctly diagnose the skin and select the appropriate cosmetics for care on this basis. The skin analyzer allows you to control the effects of cosmetic procedures. We recommend taking measurements both before and after treatments. This gives us the necessary information about the condition of the skin and the improvement of its hydration, while the client gets tangible proof from us that the condition of his skin has improved after the treatments. With the analyzer, we are able to take as many as 60 measurements, from 6 independent measuring points. The result is given as a percentage, taking into account the parameter of the patient's age.
Microdermabrasion allows abrasion of the epidermis. It is a gradual process of fully controlled, and taking into account the individual needs of the client, abrasion of the epidermis. This occurs until the desired level is reached. Diamond microdermabrasion treatment stimulates the production of elastin and collagen, and accelerates the natural processes of new, healthy tissue. The treatment makes the skin smoother, brighter and more elastic. Exfoliation of the epidermis also improves the penetration of active ingredients in the next stages of the treatment. The first effects are visible immediately after the treatment.
Vacuum Control is a system that we use as the only one in Poland. It relies on the fact that the strength of the size of the vacuum during the procedure is controlled. Thanks to this system, there are no petechiae, bruises or other mechanical damage to the skin.
2 treatment nozzles, 9 diamond heads
A system that controls the strength of the vacuum while performing the treatment.
0-26 inHg -0.18 to -0.8 bar
Radiofrequency treatment stimulates fibroblasts to rebuild and produce collagen and elastin, resulting in wrinkle-filling effects. With this treatment, the oval of the face is also improved, sagging cheeks and second chin are eliminated. The radio waves in our device have been enhanced with a 650 nm semiconductor laser beam, this enhances the lifting and therapeutic effect.
3 pieces
60 W
1 MHz
Continuous operation, 5Hz pulse, 10Hz pulse
Liposuction helps in body contouring. At the beginning of the procedure, the skin is exposed to infrared radiation. This improves cellular metabolism. This is followed by a phase in which ultrasound plays a key role. Under the flow of the waves, fat cells are shrunk, and thanks to the vibrations, the orange peel effect is reduced. The method of ultrasonic liposuction is effective for localized obesity. Fat tissue is reduced where it is hardest to get rid of with ordinary methods.
2 pieces
UD head - 50 W / IR head - 35 W.
From 880 nm to 960 nm
Continuous operation, 5Hz pulse, 10Hz pulse
During the procedure, skin folds are sucked in by the treatment head, while at the same time special beads demassage the tissue. Edematous-ulcerative changes, which are characteristic of cellulite, will not arise due to regular use of dermomassage. In addition, during the procedure the work of the circulatory system is supported, and the metabolic processes of the skin and subcutaneous tissue are stimulated. Unnecessary products of metabolism are removed from the body. Lymph flow is also improved. The effects of the treatments can also be seen in terms of water retention in the body and the removal of toxins from the body. Dermomassage counteracts swelling of the lower extremities and the feeling of heavy legs.
Medika is the only one to use the Vacuum Control system, which allows you to control the amount of vacuum during the procedure. Through the use of this innovative system, bruises, petechiae and other minor mechanical damage to the skin are avoided.
3 pieces
A system that controls the strength of the vacuum while performing the treatment.
0-26 inHg -0.18 to -0.8 bar
Oxybrasion is an effective exfoliation of the epidermis. Saline under high pressure hits the epidermis and is dispersed. The friction against the epidermis is so gentle that it does not cause irritation, which is common during this type of treatment. As a result, the skin is refreshed, cleansed, brightened, hydrated and rejuvenated. There is a revitalization of even the most sensitive skin. Thanks to oxybrasion, collagen synthesis with elastin is also stimulated. The skin is tighter and fine wrinkles are shallowened. The cold, which is used in the procedure, has a strengthening effect on the walls of blood vessels, and also soothes reddened skin.
1 piece
9 bar
Possibility of connecting an oxygen cylinder
Adjustable saline dosage
Cavitation peeling is one of the most popular cosmetic procedures and is performed in most salons. Medika has introduced innovations to this procedure, which bring the work of peeling to an even higher level. The principle of peeling is based on the use of an ultrasonic wave with a frequency of 25 kHz. This wave, directed at moist skin, produces a cavitation effect. The pressure in the stratum corneum of the skin changes and air bubbles are formed, which are then broken up, and the energy generated by this, removes dead corneocytes. Microcirculation is also improved and the flow of tissue fluids in the deeper layers of the skin improves.
The treatment has 4 programs:
- classical cleansing (i.e. cavitation peeling and sonophoresis)
- proprietary program disincrustation - deep cleansing
- McT's proprietary micromassage program
- proprietary program iontophoresis introduction of active substances
McT micromassage system
(McT - Microcurrent Therapy, makes it possible to conduct all ampoules (aqueous, aqueous-gel, fat, mixed, peptide), thanks to the fact that the module has been enriched with the use of McT microcurrents, i.e. electrical pulses of very low intensity.
1
30W
25 kHz
continuous operation, 5Hz pulse, 10Hz pulse
Join the ranks of professionals who have chosen Medika Premium. Discover how our device can transform your practice.
A must have for any beauty salon.
A cosmetic combiner is a device that is part of the equipment of professional beauty salons. Multifunctional capabilities of cosmetic procedures combined with small size is an excellent solution for your salon, especially if you have a small space. The price of the device, is lower than if you buy individual equipment with the parameters that a cosmetic combo has. The range of treatments depends on the model you choose.
TheMedika Premium Combine is distinguished by its aesthetic, minimalist design and precision manufacturing. The materials used during production are of the highest quality. The housing made of antibacterial Corian® makes it easy to clean and provides protection against the growth of bacteria and mold.
How does the beauty combo work?
A beauty combo is, in the simplest terms, a multifunctional device that contains more than a dozen functions, thus disappearing the possibility of having, for example, 3 separate devices that take up unnecessary space. Medika Premium cosmetic combos come in two versions:
Desktop countertop version, which usually contains several separate modules.
Tower which is a larger in size, standing device with wheels attached. Medika Tower can even have several functions.
Plug&Play system
The device has a Plug&Play system, which solves the problem of unsightly, tangled cables powering the treatment heads. With our premium device, you only need one universal cable to which you plug the working head. This makes your work comfortable and enjoyable.
Medika cosmetic combos use a modular system giving the possibility of any configuration of as many as 10 modules (18 technologies), all in one device, so you can select new functions at any time of use. Possible available functions include skin alizer, diamond microdermabrasion, cavitation peeling, ultrasound, needle-free mesotherapy, radio waves, dermomassage, ultrasonic liposuction, oxybrasion, lipolaser duo.
Premium 16in1 Multifunction Combine
One device, many possibilities
Polish manufacturing, global quality
Manufactured in Poland, our device is synonymous with craftsmanship and precision. Using the best local materials and technology, we offer a product that meets the highest global standards of quality and performance.
Intuitive touch operation
Thanks to its intuitive touch panel, operation of the device is simple and pleasant. The easy-to-read screen and easy-to-use Polish user interface ensure smooth and hassle-free navigation.
Housing made of antibacterial Corian®
The use of antibacterial Corian® material in the housing ensures hygiene and safety. This modern and durable material is easy to clean, which further increases the value and usability of the unit.
Clear menu in Polish language
Our device has a menu fully adapted to Polish users. Ease of access to functions and clear instructions make it easy for anyone to use.
Detailed product specifications
Premium 16in1 Multifunction Combine
* Free training course giving a certificate. Each participant, upon completion of the course, receives a certificate confirming his qualification to work on a particular device. After the training, you receive a contact to the trainer. He is at your disposal in case of any doubts about the procedure.